Parker’s 43 Series Standard Hydraulic Fittings are renowned for their ease of assembly, wide range of shapes and end forms, hose compatibility and wide range of applications in a variety of markets.
HQ manufactures 43 Series hose fittings to Parker standards. This cost effective range of permanent crimp hydraulic fittings are designed for use with crimping tools to provide a ‘snap-in’ seal and retention.
Parker’s 43 Series Standard Crimp Hydraulic Hose Fittings
1CA43 – Metric 24° Cone Female with O-Ring – Light Series – Straight Fittings – ISO 12151-2-SWS-L – DKOL
Parker’s 43 Series 1CA43-12-6 Hydraulic Hose Fittings are well known for their ease of assembly, wide variety of shapes and port configurations and hose compatibility, and are widely used in a variety of markets. This range of fittings is a permanently snapped hydraulic connector that can be used with Parker’s snapping machines to provide a ‘bite wire reinforcement’ seal and anti-pull-off force.When used with Parker’s non-stripping hoses, Series 43 fittings can be installed without stripping the outer layer of the hose, eliminating hose failure due to stripping too long or too short.
| Model | Thread | Hose ID | A | B | W | ||
| Metric | DN | inch | mm | mm | mm | ||
| 1CA43-6-4 | 6 | M12x1.5 | 6 | 1/4 | 46 | 24 | 14 |
| 1CA43-8-4 | 8 | M14x1.5 | 6 | 1/4 | 45 | 23 | 17 |
| 1CA43-10-4 | 10 | M16x1.5 | 6 | 1/4 | 42 | 20 | 19 |
| 1CA43-10-5 | 10 | M16x1.5 | 8 | 5/16 | 48 | 24 | 19 |
| 1CA43-10-6 | 10 | M16x1.5 | 10 | 3/8 | 53 | 24 | 19 |
| 1CA43-12-8 | 12 | M18x1.5 | 12 | 1/2 | 55 | 23 | 22 |
| 1CA43-15-6 | 15 | M22x1.5 | 10 | 3/8 | 52 | 22 | 27 |
| 1CA43-15-8 | 15 | M22x1.5 | 12 | 1/2 | 58 | 27 | 27 |
| 1CA43-18-8 | 18 | M26x1.5 | 12 | 1/2 | 53 | 21 | 32 |
| 1CA43-18-10 | 18 | M26x1.5 | 16 | 5/8 | 65 | 25 | 32 |
| 1CA43-18-12 | 18 | M26x1.5 | 20 | 3/4 | 65 | 26 | 32 |
| 1CA43-22-10 | 22 | M30x2 | 16 | 5/8 | 63 | 24 | 36 |
| 1CA43-22-12 | 22 | M30x2 | 20 | 3/4 | 64 | 25 | 36 |
| 1CA43-28-12 | 28 | M36x2 | 20 | 3/4 | 65 | 26 | 41 |
| 1CA43-28-16 | 28 | M36x2 | 25 | 1 | 78 | 33 | 41 |
| 1CA43-35-20 | 35 | M45x2 | 32 | 1-1/4 | 82 | 35 | 50 |
| 1CA43-42-24 | 42 | M52x2 | 40 | 1-1/2 | 77 | 39 | 60 |
1CE43 – Metric 24° female tapered thread with O-Ring – Light Series – 45° fittings – ISO 12151-2-SWE45°-L – DKOL 45°
| Model | Thread | Hose ID | A | B | E | W | ||
| Metric | DN | inch | mm | mm | mm | mm | ||
| 1CE43-8-4 | 8 | M14x1.5 | 6 | 1/4 | 60 | 38 | 19 | 17 |
| 1CE43-10-5 | 10 | M16x1.5 | 8 | 5/16 | 68 | 44 | 20 | 19 |
| 1CE43-12-6 | 12 | M18x1.5 | 10 | 3/8 | 69 | 40 | 20 | 22 |
| 1CE43-15-8 | 15 | M22x1.5 | 12 | 1/2 | 85 | 50 | 23 | 27 |
| 1CE43-18-10 | 18 | M26x1.5 | 16 | 5/8 | 91 | 52 | 25 | 32 |
| 1CE43-22-12 | 22 | M30x2 | 20 | 3/4 | 97 | 58 | 26 | 36 |
| 1CE43-28-16 | 28 | M36x2 | 25 | 1 | 125 | 80 | 34 | 41 |
| 1CE43-35-20 | 35 | M45x2 | 32 | 1-1/4 | 144 | 97 | 41 | 50 |
| 1CE43-42-24 | 42 | M52x2 | 40 | 1-1/2 | 155 | 117 | 49 | 60 |
1CF43 – Metric 24° female tapered thread with O-Ring – Light Series – 90° fittings – ISO 12151-2-SWE90°-L – DKOL 90°
| Model | Thread | Hose ID | A | B | E | W | ||
| Metric | DN | inch | mm | mm | mm | mm | ||
| 1CF43-6-4 | 6 | M12x1.5 | 6 | 1/4 | 55 | 33 | 33 | 14 |
| 1CF43-8-4 | 8 | M14x1.5 | 6 | 1/4 | 50 | 28 | 29 | 17 |
| 1CF43-10-4 | 10 | M16x1.5 | 6 | 1/4 | 48 | 26 | 29 | 19 |
| 1CF43-10-5 | 10 | M16x1.5 | 8 | 5/16 | 55 | 31 | 35 | 19 |
| 1CF43-10-6 | 10 | M16x1.5 | 10 | 3/8 | 67 | 38 | 38 | 19 |
| 1CF43-12-5 | 12 | M18x1.5 | 8 | 5/16 | 55 | 31 | 31 | 22 |
| 1CF43-12-6 | 12 | M18x1.5 | 10 | 3/8 | 67 | 38 | 37 | 22 |
| 1CF43-12-8 | 12 | M18x1.5 | 12 | 1/2 | 68 | 36 | 43 | 22 |
| 1CF43-15-8 | 15 | M22x1.5 | 12 | 1/2 | 74 | 39 | 45 | 27 |
| 1CF43-18-8 | 18 | M26x1.5 | 12 | 1/2 | 71 | 36 | 41 | 32 |
| 1CF43-18-10 | 18 | M26x1.5 | 16 | 5/8 | 79 | 42 | 49 | 32 |
| 1CF43-22-10 | 22 | M30x2 | 16 | 5/8 | 81 | 42 | 47 | 36 |
| 1CF43-22-12 | 22 | M30x2 | 20 | 3/4 | 89 | 49 | 55 | 36 |
| 1CF43-28-16 | 28 | M36x2 | 25 | 1 | 114 | 69 | 73 | 41 |
| 1CF43-35-20 | 35 | M45x2 | 32 | 1-1/4 | 129 | 82 | 94 | 50 |
| 1CF43-42-24 | 42 | M52x2 | 40 | 1-1/2 | 139 | 101 | 101 | 60 |
1C943 – Metric 24° female tapered thread with O-Ring – Heavy series – Straight fitting – ISO 12151-2-SWS-S – DKOS
| Model | Thread | Hose ID | A | B | W | ||
| Metric | DN | inch | mm | mm | mm | ||
| 1C943-8-4 | 8 | M16x1.5 | 6 | 1/4 | 45 | 23 | 19 |
| 1C943-10-4 | 10 | M18x1.5 | 6 | 1/4 | 43 | 21 | 22 |
| 1C943-10-6 | 10 | M18x1.5 | 10 | 3/8 | 50 | 21 | 22 |
| 1C943-12-6 | 12 | M20x1.5 | 10 | 3/8 | 52 | 19 | 24 |
| 1C943-14-6 | 14 | M22x1.5 | 10 | 3/8 | 50 | 21 | 27 |
| 1C943-16-8 | 16 | M24x1.5 | 12 | 1/2 | 56 | 24 | 30 |
| 1C943-20-10 | 20 | M30x2 | 16 | 5/8 | 66 | 27 | 36 |
| 1C943-20-12 | 20 | M30x2 | 20 | 3/4 | 66 | 27 | 36 |
| 1C943-25-12 | 25 | M36x2 | 20 | 3/4 | 67 | 28 | 46 |
| 1C943-30-16 | 30 | M42x2 | 25 | 1 | 78 | 33 | 50 |
| 1C943-38-20 | 38 | M52x2 | 32 | 1-1/4 | 80 | 33 | 60 |
11C43 – Metric 24° female tapered thread with O-Ring – Heavy Series – 90° fittings – ISO 12151-2 – SWE 90°-S – DKOS 90°
| Model | Thread | Hose ID | A | B | E | W | ||
| Metric | DN | inch | mm | mm | mm | mm | ||
| 11C43-8-4 | 8 | M16x1.5 | 6 | 1/4 | 58 | 36 | 32 | 19 |
| 11C43-10-4 | 10 | M18x1.5 | 6 | 1/4 | 50 | 26 | 29 | 22 |
| 11C43-12-6 | 12 | M20x1.5 | 10 | 3/8 | 64 | 35 | 37 | 24 |
| 11C43-14-6 | 14 | M22x1.5 | 10 | 3/8 | 65 | 35 | 37 | 27 |
| 11C43-16-8 | 16 | M24x1.5 | 12 | 1/2 | 72 | 37 | 45 | 30 |
| 11C43-20-10 | 20 | M30x2 | 16 | 5/8 | 79 | 40 | 48 | 36 |
| 11C43-20-12 | 20 | M30x2 | 20 | 3/4 | 89 | 50 | 58 | 36 |
| 11C43-25-12 | 25 | M36x2 | 20 | 3/4 | 89 | 49 | 59 | 46 |
| 11C43-30-16 | 30 | M42x2 | 25 | 1 | 115 | 68 | 76 | 50 |
| 11C43-38-20* | 38 | M52x2 | 32 | 1-1/4 | 130 | 83 | 80 | 60 |
Must use PK2 snap, mold: 83C-A20H
HQ’s 43 Series Hydraulic Hose Fittings
HQ’s 43 Series hose fittings can be used with ZMTE’s No-Skive hose. Series 43 fittings can be assembled without removing the hose casing, eliminating premature failure due to over- or under-stripped hose. Applications include hydraulic industry standards, constant working pressure, high and low temperature, suction and return.
HQ specialises in hydraulic fittings. Its 43 Series products range in size from 1/4′ to 2′, with a variety of end styles and more than 2,500 configurations. Products are sold worldwide. Stainless steel 43 series fittings are available for highly corrosive applications.
Key Features and Benefits
- Easy to push
- Hexagonal inch
- Stainless steel available
- Multiple end configurations
- One piece design reduces complexity and leak paths
- Non-slip technology provides a simple, efficient and safe manufacturing process
Markets for Parker 43 Series Hydraulic Fittings
- Transport
- Camper and Bus
- Military
- Construction
- Agricultural
- Grounds and building maintenance
- Forestry
- Railway
- Utility equipment
- Personnel Lifting Equipment
- Machine Tools
- Oilfield Services
- Waste and refuse
- Materials Handling
- Marine Transport
- Paving and road maintenance
- Ground Support Equipment
- Industrial
- Mining
Applications for Parker 43 Series Hydraulic Fittings
- Petroleum based hydraulic fluids and lubricants
- Phosphate ester based hydraulic fluids
Compatible Hoses
- 301LT
- .302
- .304
- ·351TC,351ST
- .422
- .424
- .426
- 431
- .436
- ·451TC,451ST
- 471TC,471ST
- .472TC
- 482TC,482ST
- 22ST
- 881
